Screening technology

IntenSieve®, the rotating belt finesieve

Developped specifically for the removal of suspended matter from sewage water, the Intensieve® is a rotating belt with fine screen that can be used for both communal and industrial applications. The screening technique distinguishes itself in liquid flows with increased concentrations of fibres or liquid flows in which suspended matter has a particle size distribution and cake filtration can be applied.

Downstream dewatering with CellPress®

The CellPress® is a screw press that combines maximum dewatering efficiency with excellent separation efficiency specifically for the dewatering of sieved material from sewage water captured with the IntenSieve®.

#municipal_facility #industrial_facility

Rotating Drumscreen

The Rotodrum is a fine screen, with rotating wedge-wire drum. The water is introduced into the screen through a special distribution headbox. Solids are captured inside the cylinder, thickened and continuously discharged to the outlet, while the filtrate flows through the opening of the wedge-wire. The Rotodrum is completely manufactured in stainless steel and the screen openings range from 0,5 to 5 mm.

#municipal_facility #industrial_facility

Discfilter for effluent polishing​

The principle of filtration through the discs is extremely simple. The water to be filtered flows under free fall in the rotating central tube into the discs. These are stretched on both sides with micro fabric and flows from the inside out through the panels. The solids are collected on the panels and the purified water flows through the panels. As soon as the amount of captured material increases to such an extent that clogging starts to occur on the filter plates and the liquid level in the machine starts to rise, the sieve starts to rotate so that clean surface becomes available to the water to be filtered. The collected material is rinsed from the screen and removed from the machine via a central drain.

#municipal_facility #industrial_facility

Pilots

We offer the capability to test each of our machines and systems in pilot form before full-scale implementation. This approach allows us to validate performance, optimize configurations, and ensure that our technologies are perfectly suited to the task at hand. By conducting these pilot tests, we provide our clients with the confidence that their chosen solutions will deliver maximum efficiency, sustainability, and reliability in real-world conditions.

Services

We offer you a variety of service levels, resulting in a custom-made plan tailored to your choice and requirements.

Our service plans can provide regular inspections, on-going monitoring, preventive and corrective maintenance and full plant operation for the entire system or only spare part delivery. Our goal is to keep your system at maximum performance and at the lowest possible cost of ownership.

Our monitoring and control services support you with resolving emergencies and continuously improve the reliability of your plant, optimizing processes and lowering operational costs.